Technical parameters of mineral alloy wear-resistant floor hardener
Construction steps: Check the flatness and adhesion of the original cement mortar floor. After meeting the technical requirements, stir the wear-resistant materials with a stirrer and add water to the floor. When the wear-resistant material is initially set, the machine is polished step by step. After the wear-resistant material is completely dried, it is polished and polished with a trowel. After the construction is completed, water conservation is performed. After the maintenance period is completed, a special machine is used for grinding and polishing, and a special floor wax is used for waxing.
Strengthen the abrasion resistance, impact resistance and strength of the concrete floor. The density of concrete is greatly improved, which reduces dust generation, increases the oil resistance of the ground, and forms a high-density, easy-to-clean, and impervious floor. Construction together with the concrete floor has a short construction period and good durability, which reduces the cost due to periodic painting or thickening the surface.
The ground hardener of mineral alloy aggregate (gold steel sand) is composed of certain graded mineral alloy aggregate, special cement and other admixtures, and admixtures, which can be used after opening. It is evenly spread on the concrete surface of the initial setting stage, and processed by a special process to form a whole with the concrete floor. And high-performance wear-resistant floor with high density and coloring.